Stunning Thorens TD-160 Super Reproduction, new Rega RB-303 tonearm, deluxe Zebrawood plinth

$1,729.00

Stunning Thorens TD-160 Super Reproduction, new Rega RB-303 tonearm, deluxe Zebrawood plinth

1 in stock

SKU: super deluxe zebrawood oct 2019-1-1 Category: Tags: , , ,

Description

Why buy a restored vintage Thorens turntable from Vinyl Nirvana?

When you buy a restored turntable from Vinyl Nirvana, the table has undergone a multistep inspection, tuning, and detailing regimen.  The work is performed by me, someone who has worked exclusively on belt driven, suspended subchassis turntables such as Thorens, Linn, and AR for over a decade.  I know these models intimately, and have developed techniques over my lifetime to restore them to the best condition possible.

In addition, since I have probably the largest selection of parts for these turntables in North America, if it is determined by inspection that something needs to be replaced because it is missing, broken or worn, it happens. Though all of the turntables I sell will be 100% functional, because of their age, cosmetic condition will vary.  It is my pledge to you that any and all cosmetic defects will be pointed out in the item description, and whenever it is possible, photographs will be provided.  When you buy from me, it is not like eBay where you have to wonder if you are getting what you are really getting.  If there is a flaw cosmetically, you will know it is there.

As a potential buyer, you should know I don’t just service these turntables, I love them.  To me, Vinyl Nirvana turntables represent the best of both worlds: 1) Design, fit, and finish from the height of European manufacturing 2) Lovingly restored by someone who knows them inside and out.  Those who are considering a contemporary alternative should consider the fact that Thorens and AR turntables were made in the thousands, if not tens of thousands. Parts for these models abound.  The same cannot be said for contemporary makers.

Finally, because none of the above will matter if the turntable doesn’t reach you in one piece, I have extensive experience in safely shipping vintage turntables.  I know the tricks and the techniques to get your turntable to you without incident.  I literally ship over 100 turntables per year, and my success rate is over 99%.  In the fractional amount of cases where there is a problem, it is always resolved with your complete satisfaction as my goal.  A lot of businesses make that claim; with me you will find it is a way of life. See our testimonial page.

The Featured Thorens TD-160 Super Reproduction, new Rega RB-303 tonearm, deluxe Zebrawood plinth

The Story

Hands down, the turntable for which I receive the most requests is the Thorens TD-160 Super.  Unfortunately, this premium Thorens model was not manufactured in great numbers, so there are just not that many that come to the used market.  For those who don’t know, what made the Super model the Super was 1)a beefier plinth and bottom; 2)underside damping; 3)heartier hinges; 4) a cleaner (and sexier) top plate that allowed changing arms without the vestigial cueing lever or armrest holes.

Having worked with a metal sheet fabricator and silk screener last year on the 125 Long Base project, I decided to undertake having high quality replica top plates manufactured.  I knew that both companies were up to the task after the truly astounding job they did on the 125LB  fascia plate.  What you see pictured is the result.   The plates are identical in every way except for some instructional printing in the area covered by the platters.

Meeting the other “obligations” for the Super designation were simple.  The damping is something I’ve been doing to various tables for years, mostly at the request of customers.  The plinths are our own custom plinths, which exceed the quality of the Thorens in terms of being solid wood, not veneer.  Finally, the dustcover is set-on style, eliminating the need for hinges altogether.

Performance-wise, having both a genuine Thorens TD-160 Super and my reproduction sitting side by side on my bench, it is easy to argue that this reproduction should actually exceed the performance of a stock TD-160 Super because of the increased mass and density of the solid wood plinths.

The Table

What makes this week’s offering EXTRA special is the custom plinth in solid 3/4″ zebrawood. Note my woodworker “capped” the top rail with 3/16″ solid wenge. I just love the contrasts in the wood!  This is by far my favorite plinth of 2019. As fabulous as this looks in the photos, it is even more so in person.  The custom plinth was crafted by a finish carpenter/cabinet maker with over thirty years of experience. It was finished in mulitiple coats of Tung oil finish.  As mentioned above, the custom plinth is substantially more dense and heavy than the stock  plinth.  A 1/2  inch mdf bottom also adds mass.

Cosmetically, this table is a solid 9.5 on a scale of 1-10.  With the new plinth, new top plate and new cover, it really is museum quality, with not one single cosmetic flaw to report.  (Why not a 10.0?  I just don’t feel comfortable listing a vintage table as a 10.0.)  Note the new custom acrylic dustcover is included, however, the Bren record needs to be added from the parts section.

Note: there is now an option for a hinged cover.  This adds $85.  Add a note in the check out if desired.

The new Rega RB-303 Tonearm

The 303/330 appears in most stereo mags as an incredible audio value.  I heartily agree.  If you have never compared  the RB-303/330 to the older RB-300, it features a 3-point mount which adds more stability and a much beefier/better quality rca cable.  The arm is mounted on a Vinyl Nirvana solid machined aluminum armboard, brushed and anodized. The arm and custom armboard are a $600+ value!

The arm will mate well with cartridges in the $200-$1500 price range. I am a dealer for Ortofon, Grado, and Dynavector. If you purchase from me, the cartridge will be mounted and aligned, making set-up in your home that much easier. Additionally, you can send me your own cartridge for mounting for $40.

Finally, if you would prefer a tonearm with a removeable headshell you can opt to have the turntable equipped with the Jelco TS-550S for an additional $150.   Write me a note in check out, and I will bill you separately.

The Details

110/120 volt 60 hz only

Note: Due to the nature and scope of my business, shipping your turntable package can range from 2-10 business days. After your purchase, I will contact you within 24 hours with my best shipping estimate date. 

Note: Turntables with sprung subchassis are wonderful in many ways for isolating your turntable from unwanted resonances, however, they are susceptible to footfalls. If this turntable is going in a room with bouncy floors, it will need to go on a wall shelf for proper functioning. 

We have over fifteen years experience shipping vintage turntables successfully. All turntables are packed with the utmost concern with them arriving in the same condition you see pictured here.

If the buyer needs it, I can supply up to a half hour hour of help by phone with set up. (At a mutually arranged time.) In general, most buyers don’t need it, but if there IS a problem, I am there. I also have many videos available to hel with various set-up issues.

Your table is guaranteed to look and work as described, or you may return it within ten days of arrival for a full refund, minus return shipping charges and a 5% restocking fee.  After ten days, all returns are for merchandise credit only. If you ever have an issue with your purchase, 3 weeks or months or years after the purchase, please contact me and we will resolve the issue in a way we mutually agree upon.

Read what Ben Folds and others have had to say about buying from Vinyl Nirvana.

 

Additional information

Weight 576 oz
Dimensions 24 × 18 × 14 in

You may also like…