Another Turntable Offering:
Complete Package! Thorens TD-125 w/SME M2-9 Tonearm & Dynavector 20X2H Cartridge, $1995 plus shipping
Why spend more to buy a refurbished Thorens turntable from Vinyl Nirvana?
Buying vintage electronic equipment on eBay can be a gamble. To better your chances at winning, you want two things: 1) Plenty of information about the auction item; and 2) A seller you can trust. When an Thorens turntable is refurbished by Vinyl Nirvana, it undergoes a multi-step inspection and tuning regimen. Ask another seller of a Thorens table on Ebay these questions and see if you can get a response… Is the motor running silently? Any unhealthy bearing noise? Is the spindle straight? Was the spindle cleaned of old belt residue, which can cause rumble? Does the belt properly interface with the spindle on both 33 and 45 rpm? Is the belt new or in near mint condition? Is the proper length belt installed? (Differences of less than an inch can result in speed changes.) Is the proper width belt installed? (Differences can result in belt slippage or faulty change of speed.) Has the platter bearing been inspected? Is it straight, true, and without significant wear? Has the platter bearing well been inspected? Was it cleaned of old grease and contaminants? Was it properly lubed with appropriate oil? Is the tonearm functioning properly? Any significant side-to-side motion, which can adversely affect tracking? Is range of motion appropriate? Is anti-skate functioning? Is appropriate tonearm weight installed? Is cueing adjusted properly? Were electrical connections cleaned and inspected? Headshell leads? Tonearm recepticle? RCA plugs? (Dirty connections can contribute to hum problems.) Are all connections tight? ( I use Dexoit products, highly recommended.) Is transport screw intact? Is it functioning properly? Are dust cover hinges intact and not stripped? Was all wiring beneath the turntable inspected? Were worn solder joints re-soldered? What is the condition of the AC cord? The interconnect cable? Are springs in good working condition? Have worn springs been replaced? Has spring suspension been tuned? (This is an art learned through having set up dozens of these tables.) Was the speed checked by strobodisc? Was headshell inspected? Is there any stripping? Do the cartridge screws hold tight? Are the leads brittle? Is the tonearm rest original? Is it functioning properly? Is a proper mat installed? Is the base intact? Are the rubber feet intact? If a Thorens table fails to pass any of the above inspections, Vinyl Nirvana corrects the problem before it gets listed. If the turntable is unsellable due to too many defects, it becomes a parts unit to be used in the restoration of other Thorens units. In addition to this multi-step inspection, each turntable is thoroughly detailed with appropriate cleaners. The average cleaning takes up to two hours. Though the tables Vinyl Nirvana sells will vary cosmetically, they will always be clean. Can you trust Vinyl Nirvana as a seller? Please read our ebay feedback (username vinylnirvana3345)regarding sales of turntables. See our testimonial page.
This Week’s Thorens TD-125 Package w/SME M2-9Tonearm & Dynavector 20X2H Cartridge
Cosmetically, I would rate this particular turntable an 8.5/10.0. The original wood veneer base is in overall very good to excellent condition. When you look at the close-ups, note the small dings at each front edge, and the shallow scratch on the side rail on the tonearm side. The metal top is in very good condition as well, with only the slightest signs of discoloration and markings, most too small in pictures. The front fascia switch plate is also very good, with some very slight nicks on the control knobs and some very light discoloration on the brushed aluminum. (See pics)
The TD-125 features three speeds: 16, 33, and 45. There is a pitch controller and a stroboscope for precise speed adjustment. The speed control unit has been completely serviced, with the caps and transistors most likely to fail replaced! After replacement, it was completely reset to original spec. It is now ready for another 40 years of service!
The new custom dustcover and the Bren weight are included!
Please note if the cosmetics on the metal plate are bothersome, the pale grey top can be professionally sandblasted and powercoated in any color under the sun for $150. (4-6 weeks leadtime needed.) Same for the issues at the front edge of the plinth, a new custom plinth can be ordered in just about any wood desired for an additional $395.
The SME M2-9 Tonearm
The SME tonearms have been lauded for their excellence for over 40 years. The M2-9 is their latest arm. (Retail $1095) It incorporates many of the classic SME characteristics, yet belongs solidly in the here and now. It can easily handle cartridges in a multi-thousand dollar range. The arm is under warranty and includes original packing/literature/hardware.
The Dynavector 20X2 High Output Moving Coil Cartridge
Included at the sale price (amazingly) is a brand new Dynavector 20X2 High Output Moving Coil Cartridge. If you Google reviews for this cartridge, you will see universal accolades. It retails for $850, but here it is included as part of the package! I can mount and align the cartridge here in my shop, or leave that for you. If the new owner would like the Low Output version, that will be an additional $100 to the sale price.
The Details
This table will be packed like it is a fragile pane of glass. I simply care too much for these tables to just shove them in a box. I will carefully pack the table in extra sturdy boxes. and bubble wrap. I prefer Fedex Ground. Lastly, I am truly not in this for the money. What I love best is introducing someone new to the joys of vinyl, getting someone back into vinyl who left it for the “superiority” of cds, or helping someone else who does appreciate it to “move up.” In that regard, I do what few sellers do…if the buyer needs it, I can supply up to one hour of help by phone with set up. (At a mutually arranged time.) In general, most buyers don’t need it, but if there IS a problem, I am there. Your table is guaranteed to look and work as described, or you may return it within ten days of arrival for a full refund, minus return shipping charges. After ten days, all returns are for merchandise credit only.
Some comments from buyers…. “Outstanding & dedicated craftsman. Helpful hints. Personal attention.” “The best! A great communicator who goes above and beyond in the service dept.” “If you want an excellent reconditioned vintage turntable, Dave’s the Man! Thanks” “When eBay was invented, nobody dreamed there’d be a seller as great as Dave!!”
Email me if you are interested in purchasing this turntable or another one I have slated for restoration.
