Another Turntable Offering:
Classic Thorens TD-125 w/SME 3009 tonearm, new acrylic platter mod, and more! $1295 plus shipping SOLD
Why spend more to buy a refurbished Thorens turntable from Vinyl Nirvana?
Buying vintage electronic equipment on eBay can be a gamble. To better your chances at winning, you want two things: 1) Plenty of information about the auction item; and 2) A seller you can trust. When an Thorens turntable is refurbished by Vinyl Nirvana, it undergoes a multi-step inspection and tuning regimen. Ask another seller of a Thorens table on Ebay these questions and see if you can get a response…
Is the motor running silently? Any unhealthy bearing noise?
Is the spindle straight? Was the spindle cleaned of old belt residue, which can cause rumble?
Does the belt properly interface with the spindle on both 33 and 45 rpm?
Is the belt new or in near mint condition?
Is the proper length belt installed? (Differences of less than an inch can result in speed changes.)
Is the proper width belt installed? (Differences can result in belt slippage or faulty change of speed.)
Has the platter bearing been inspected? Is it straight, true, and without significant wear?
Has the platter bearing well been inspected? Was it cleaned of old grease and contaminants? Was it properly lubed with appropriate oil?
Is the tonearm functioning properly? Any significant side-to-side motion, which can adversely affect tracking? Is range of motion appropriate? Is anti-skate functioning? Is appropriate tonearm weight installed?
Is cueing adjusted properly?
Were electrical connections cleaned and inspected? Headshell leads? Tonearm recepticle? RCA plugs? (Dirty connections can contribute to hum problems.) Are all connections tight? ( I use Dexoit products, highly recommended.)
Is transport screw intact? Is it functioning properly?
Are dust cover hinges intact and not stripped?
Was all wiring beneath the turntable inspected? Were worn solder joints re-soldered?
What is the condition of the AC cord? The interconnect cable?
Are springs in good working condition? Have worn springs been replaced? Has spring suspension been tuned? (This is an art learned through having set up dozens of these tables.)
Was the speed checked by strobodisc?
Was headshell inspected? Is there any stripping? Do the cartridge screws hold tight? Are the leads brittle?
Is the tonearm rest original? Is it functioning properly?
Is a proper mat installed?
Is the base intact? Are the rubber feet intact?
If a Thorens table fails to pass any of the above inspections, Vinyl Nirvana corrects the problem before it gets listed. If the turntable is unsellable due to too many defects, it becomes a parts unit to be used in the restoration of other Thorens units. In addition to this multi-step inspection, each turntable is thoroughly detailed with appropriate cleaners. The average cleaning takes up to two hours. Though the tables Vinyl Nirvana sells will vary cosmetically, they will always be clean. Can you trust Vinyl Nirvana as a seller? Please read our ebay feedback (username vinylnirvana3345)regarding sales of turntables. See our testimonial page.
This Week’s Thorens TD-125 w/SME 3009 Series II Improved Tonearm
Thanks for looking at and reading about this gorgeous Thorens TD-125. Those who follow my sales know I rarely list Thorens TD-125s, and when I do, they sell fast. Though I love the TD 160 line, there is something about the substantialness of the 125 series that excites me. One thing is for sure, it is an ideal mate for the SME 3009 arms series.
I would rate this particular turntable an 9.0/10.0. The European walnut veneer is in excellent condition overall with only extremely minor wear on both side rails near the front. The metal top is in very good to excellent condition with no significant cosmetic issues. The brushed aluminum faceplate is in excellent condition as well, with all lettering crisp and dark. The arm board is in very good to excellent condition, with only minor blemishes so slight they were difficult to photograph.
The TD-125 features three speeds: 16, 33, and 45. There is a pitch controller and a stroboscope for precise speed adjustment. The speed control unit has been completely serviced, with the caps and transistors most likely to fail replaced! It is ready for another 40 years of service!
For upgrades, I have installed my latest mod for Thorens: a custom acrylic platter. The platter is precisely machined with an inset in the bottom for the drive platter. The acrylic platter has been an upgrade modification touted for the AR turntables for decades. It is very exciting to now offer these for the Thorens line-up. Please note the upgrade platter does reduce usable spindle length, however, as you can see in the photos, there is still enough room for use of a record weight. (Speaking of which, the Bren record weight is included!) No dust cover is included. New custom covers are available by several artisans.
The SME 3009 Series II Improved Tonearm
The SME 3009 tonearms have become the holy grail for vintage turntable enthusiasts. The arms have consistently increased in value over the past 10 years. The Series II Improved is arguably considered the best of the 3009s; they have graced literally hundreds of turntables in the 125 series. This was THE classic table/arm combo in college in the 70s and early 80s. Cosmetically, the arm is in very good to excellent condition, with no significant flaws to report. It is 100% tested and functional
Overall, this is a stunning table with a serious arm capable of handling cartridges in the $500 to $2000 range with ease. I would be happy to mount any cartridge for the new owner for $40. If I install the cartridge, it makes set-up incredibly easy for set-up.
The shipping included price is for the lower 48 states only. This table will be packed like it is a fragile pane of glass. I simply care too much for these tables to just shove them in a box. I will carefully pack the table in extra sturdy boxes. and bubble wrap. I prefer Fedex Ground. Lastly, I am truly not in this for the money. What I love best is introducing someone new to the joys of vinyl, getting someone back into vinyl who left it for the “superiority” of cds, or helping someone else who does appreciate it to “move up.” In that regard, I do what few sellers do…if the buyer needs it, I can supply up to one hour of help by phone with set up. (At a mutually arranged time.) In general, most buyers don’t need it, but if there IS a problem, I am there.
Your table is guaranteed to look and work as described, or you may return it within ten days of arrival for a full refund, minus return shipping charges. After ten days, all returns are for merchandise credit only. Any new items are under full product warranty as I am a dealer.
Some comments from buyers….
“Outstanding & dedicated craftsman. Helpful hints. Personal attention.”
“The best! A great communicator who goes above and beyond in the service dept.”
“If you want an excellent reconditioned vintage turntable, Dave’s the Man! Thanks”
“When eBay was invented, nobody dreamed there’d be a seller as great as Dave!!”
Email me if you are interested in purchasing this turntable or another one I have slated for restoration.